does sound travel up or down in an apartment

Apartment living can introduce you to a cacophony of noises from many sources in all directions. If you’ve ever felt a neighbor’s bass booming through your living space in time to their awful music, then you know the problems this can present all too well. In such a situation, you may be looking to find the culprit and wondering where they live. Are they above or below? Well, does sound travel up or down?

So, which way does sound travel, up or down? Actually, neither. Sound will spread out in all directions unless something blocks or redirects it. It may travel at different speeds through different mediums such as air or solids, but it will continue to expand in all directions equally unless something acts upon those sound waves.

Interestingly, not all types of sounds will travel the same distance. Certain types of sound have much greater reach than others. Moreover, how the sound is traveling will also affect how far it can reach. Is the sound being transferred through solid surfaces such as walls and floors, or is it just projecting through the air? Let’s dig a little deeper into each of these and see how they affect the direction and distance which sound travels.

How Does Sound Travel?

Once a sound is created, it continues to project out in the form of sound waves that spread in all directions. The sound travels until it is redirected by coming into contact with another surface, such as a wall. Once it contacts a hard surface, many of the sound waves will be reflected and the wave will continue moving in a new direction with less energy. 

Sound can also be transferred through contact. Sound travels along hard surfaces by way of vibration, which can continue to travel through any surfaces that are in contact with the surface where the sound originated. 

Low-frequency sounds tend to travel more through contact as they have more energy and create more vibration. Higher-frequency sound travels through the air and is more easily absorbed and reflected than the lower-frequency noise.

Do All Sounds Travel the Same Distance?

So, how far can sound travel? As we mentioned, low-frequency sounds contain more energy, which means they also travel farther. On the other hand, high-frequency sound travels less distance overall since the sound waves contain less energy. This is the reason that they are reflected and absorbed more easily.

In an apartment, it’s much more difficult to tell where low-frequency sounds are coming from. The sound travel can be so great with low-frequency sounds that it could be coming from anywhere in your building. Alternatively, higher-pitched noises don’t travel as far. Thus they must be originating closer to your living space. This makes them easier to find and identify.

Do All Sounds Travel the Same Speed?

Since lower-frequency sounds contain more energy, you may expect the speed that sound travels at to be accelerated. However, all frequencies of sound move at the same speed. What affects differences in sound travel speed is the medium through which the noise travels. 

Compared to air, sound travels 15X faster through steel. This means that the pumping bass from a stereo anywhere in your building can easily travel through the structural steel beams that hold your apartment together and travel quickly from one end to the other. This can make it quite challenging to determine where an offending noise is even coming from. 

Water transmits sound four times faster than air, though nowhere near as fast as steel. Interestingly, sound waves even move faster in warm air when compared to cold air. 

In an apartment, this can mean that sound will find certain mediums through which it can travel fastest and allow it to be spread the farthest. For instance, noise may transfer through the concrete floor very quickly and spread across an entire level of the building. However, it may reach the wood used to construct the walls and no longer move as quickly. This may stop the sound travel much quicker, which prevents it from spreading to other floors.

Does Sound Travel Up or Down in an Apartment?

If you live in an apartment, you’re probably subject to a lot of extraneous noise. Footsteps are easy to hear above your head. But, how about that booming bass from a neighbor’s stereo? When you hear that, you’re wondering does sound travel up or down so you can find which neighbor is making all the ruckus. 

Sound will travel both directions evenly through the apartment building. However, the lower floors will tend to have more noise than the higher floors. This is because most of the noise is generated on the floors of the apartments above. 

Once a sound is generated on the floor, it will travel from the floor into the walls that connect. From there, it will spread out in every direction via vibration. That said, often the floor and walls are made from different materials that will transmit the sound at different speeds. 

As you get higher in an apartment building, there are fewer floors above your head where noise can be generated. On the bottom floor, there could be many rooms directly above you that are all starting points for noise generation. On the top floor, there’s nothing above your head to create noise, so you’ll only deal with noise coming up from below you.

Can upstairs neighbors hear downstairs neighbors? Not normal sounds like walking and talking. Generally, a thick concrete floor will separate you from the people below you. This floor transmits sound from contact very well, but that noise won’t travel as well up the walls since they’re constructed from wood. This is the reason you hear the footsteps above your head, but your upstairs neighbors don’t hear you walking around. 

Can you Direct Sound?

Sound can be directed, deflected, and absorbed. Sound waves carry energy which can be dissipated, reflected, and nullified. Once you kill the energy, the sound wave dies and the noise stops traveling. Of course, different frequencies respond differently to each of these methods of redirection.

High-frequency sounds can be reflected quite easily. All it takes is a hard surface. Since high-frequency sound waves don’t contain much energy, they don’t have enough power to cause vibration, which will transfer sound. 

When a high-frequency sound wave hits a hard surface, it’s reflected off the surface and moves away in a new direction. This deflection does absorb some of the sound wave’s energy, though, which means the reflected sound is quieter and has even less energy.

Sounds in the higher frequencies can also be absorbed fairly easily since they don’t contain very much energy. Instead of a hard surface, for absorption, you’re looking for something soft such as studio foam, blankets, even furniture can help absorb high-frequency sounds. 

Low-frequency sounds have different characteristics because they contain so much more energy and can create vibration. This means they can’t be deflected very well. The wave won’t bounce off a hard surface instead of being absorbed into the surface as vibration, which will transfer the noise.

Although they can’t be reflected very well, low-frequency sounds can still be absorbed. However, nullifying these high-energy sound waves will take a lot more than with the high-frequency noises. Lower sounds will require a lot of dampening material to absorb. 

Products designed to absorb higher-frequency sound waves tend to be 1” thick to about 3” thick. This is plenty for absorbing the energy of the higher sounds and nullifying them. The high-energy low-frequency sounds will require more in the line of 6”-12” thick sound-absorbing material to cancel that much energy.

For more information on controlling low frequency noise please see our articles How to Keep Bass From Going Through Walls, How to Block Out Low Frequency Noise.

 

How to Direct and Control the Noise

Many products exist to help absorb, deflect and redirect sound. Sound control panels come in many sizes, shapes, and colors. They can match your decor and will do a great job of containing the higher frequency sounds. Noise-control curtains can also prevent noises from coming in or out through windows, doors, and other weak points where sound often escapes.

Low-frequency sounds are much harder to get rid of. Since these high-energy sound waves are transferred most through contact, it’s best to decouple any low-frequency noise generators from any hard surfaces. For instance, subwoofers and large speakers should be placed on rubber risers or mats. This will help stop the transfer of sound through the floor and will reduce the amount of noise spreading to your downstairs neighbors. 

Conclusion

Apartment living can be a noisy situation that’s hard to control. If you’re like me, you’ve probably been wondering if sound travels up or down, trying to determine where the worst noise is coming from. Hopefully, now you understand how sound travels in all directions but moves at different speeds through different mediums. You’ve also got a few ideas for how to mitigate the issue, which I hope will help you find some peace in your home.

If you found this information useful, please share it with others who may also have too much excess noise in their lives. I will respond to any questions or comments left in the comments box below, so feel free to ask me anything.

 

Photo of author

Author S Krone

A lawyer never retires. So I would just say that I am not as active as I used to be. Now I simply dedicate myself to fishing, my hobby, and my grandchildren. For Business Finance News I write about legal aspects of mortgage policies, mostly regarding the rights of policyholders. I also have articles about personal injuries.

Thank you for visiting businessfinancenews.com

Leave a Comment

Business Finance

About Us

Business Finance News is a brand oriented to business owners and dedicated to analyzing and comparing the cost and conditions of B2B procurement of goods and services through free quotes delivered by business partners.

Contact

Address 5050 Quorum Drive, (75254) Dallas TX

telephone 844-368-6072

DISCLAIMER

A personal loan is a medium term loan with a fixed interest rate that is repaid in equal monthly payments and it's usually limited to 24 months. Loan offers and eligibility depend on your individual credit profile. Our lenders can help you obtain as much as $3,000 depending on the lender, your state and your financial situation.

The owner and operator of businessfinancenews.com is not a lender and is not involved into making credit decisions associated with lending or making loan offers. Instead, the website is designed only for a matching service, which enables the users contact with the lenders and third parties. The website does not charge any fees for its service, nor does it oblige any user to initiate contact with any of the lenders or third parties or accept any loan product or service offered by the lenders. All the data concerning personal loan products and the industry is presented on the website for information purposes only.

Businessfinancenews.com does not endorse any particular lender, nor does it represent or is responsible for the actions or inactions of the lenders. Businessfinancenews.com does not collect, store or has access to the information regarding the fees and charges associated with the contacting lenders and/or any loan products. Online personal loans are not available in all the states. Not all the lenders in the network can provide the loans up to $3,000. Businessfinancenews.com cannot guarantee that the user of the website will be approved by any lender or for any loan product, will be matched with a lender, or if matched, will receive a personal loan offer on the terms requested in the online form. The lenders may need to perform credit check via one or more credit bureaus, including but not limited to major credit bureaus in order to determine credit reliability and the scopes of credit products to offer. The lenders in the network may need to perform additional verifications, including but not limited to social security number, driver license number, national ID or other identification documents. The terms and scopes of loan products vary from lender to lender and can depend on numerous factors, including but not limited to the state of residence and credit standing of the applicant, as well as the terms determined by each lender individually. 

APR REPRESENTATIVE

APR (Annual Percentage Rate) is the loan rate calculated for the annual term. Since businessfinancenews.com is not a lender and has no information regarding the terms and other details of personal loan products offered by lenders individually, businessfinancenews.com cannot provide the exact APR charged for any loan product offered by the lenders. The APRs greatly vary from lender to lender, state to state and depend on numerous factors, including but not limited to the credit standing of an applicant. Additional charges associated with the loan offer, including but not limited to origination fees, late payment, non-payment charges and penalties, as well as non-financial actions, such as late payment reporting and debt collection actions, may be applied by the lenders. These financial and non-financial actions have nothing to do with businessfinancenews.com, and businessfinancenews.com has no information regaining whatsoever actions may be taken by the lenders. All the financial and non-financial charges and actions are to be disclosed in any particular loan agreement in a clear and transparent manner. The APR is calculated as the annual charge and is not a financial charge for a personal loan product. 

Late Payment Implications

It is highly recommended to contact the lender if late payment is expected or considered possible. In this case, late payment fees and charges may be implied. Federal and state regulations are determined for the cases of late payment and may vary from case to case. All the details concerning the procedures and costs associated with late payment are disclosed in loan agreement and should be reviewed prior to signing any related document. 

Non-payment Implications

Financial and non-financial penalties may be implied in cases of non-payment or missed payment. Fees and other financial charges for late payment are to be disclosed in loan agreement. Additional actions related to non-payment, such as renewals, may be implied upon given consent. The terms of renewal are to be disclosed in each loan agreement individually. Additional charges and fees associated with renewal may be applied. 

Debt collection practices and other related procedures may be performed. All the actions related to these practices are adjusted to Fair Debt Collection Practices Act regulations and other applicable federal and state laws in order to protect consumers from unfair lending and negative borrowing experience. The majority of lenders do not refer to outside collection agencies and attempt to collect the debt via in-house means. 

Non-payment and late payment may have negative impact on the borrowers’ credit standing and downgrade their credit scores, as the lenders may report delinquency to credit bureaus, including but not limited to Equifax, Transunion, and Experian. In this case the results of non-payment and late payment may be recorded and remain in credit reports for the determined amount of time.