acoustic spray foam

If you’re looking to apply acoustic treatment in an oddly shaped room, you may be considering spray foam insulation. But can spray foam reduce noise to a noticeable extent? More importantly, what kind of foam has the best soundproofing properties?

Before you can dive into the details, you ought to take a moment to understand what goes into making spray foam insulation. Learning about what it is and what its properties are will also tell you where you can use it. If nothing else, that should help you determine whether acoustic spray foam really is the product you’re looking for — or whether a more traditional alternative would be more suitable for your project.

What Is Spray Foam Insulation Made Of?

In essence, spray foam insulation is made of polyurethane (PU, for short), a polymer of several organic compounds. Though PU was first synthesized in the late 1930s, it wasn’t used for insulation purposes until the 70s. So how does this material work?

Nowadays, professional spray foam insulation comes to construction sites in two separate containers, allowing the crew to mix it on the spot. One of the components contains isocyanates in the form of MDI and pMDI. The “B” side of the mixture contains polyols, which are needed to create PU, as well as a catalyst, blowing agent, flame retardant, and surfactant. All these ingredients are necessary to create the reaction that propels the polyurethane, making it foam up, expand, and harden.

Notably, open-cell foam insulation has carbon dioxide as the blowing agent, the compound that makes the solution foamy. Since that gas has a high impact on the climate, most “green” construction projects steer clear from that kind of insulation. Still, if that’s something you’re worried about, you can always use an alternative with a lower climate impact. Just look for insulation that uses HFO compounds as blowing agents — or opt for closed-cell foam instead.

Once the spray insulation sets, it’s there to stay. Unlike most batt products, hardened foam insulation will never lose its insulating properties or sag. Since the material isn’t fibrous, it should be decently resistant to mold growth. But what does that mean for its acoustic value?

Can Spray Foam Insulation Reduce Noise?

One of the core properties of expanding foam insulation is that it’s capable of getting into every nook and cranny. Unlike traditional blanket insulation, foam completely seals any cracks and gaps in the surface you’ve placed it on. As such, this kind of insulation is capable of increasing the energy efficiency of your home more so than any fibrous insulation product.

Ultimately, spray foam insulation creates an almost perfect air barrier, thereby preventing heat loss. According to some estimates, this kind of product can produce up to 50% energy savings for the household. Naturally, those same properties also make it one of the most valuable tools we have in the fight against noise pollution.

After all, noise usually enters or exits the home through the weakest areas of the walls, ceilings, and floors. Those are typically around the windows and doors, but you could have cracks pretty much anywhere. Expanding foam can effectively close those gaps and add mass to the large surfaces that are more difficult to examine. Still, different types of foam insulation can achieve that with varying levels of success.

Which Type of Spray Foam Insulation Has Better Acoustic Properties?

Even though the two types of spray foam insulation you’ll find on the market are made of the same stuff, they have wildly different properties. You see, the blowing agent that combines with the liquid foam can make the resulting insulation have an open or closed-cell structure.

Closed-cell foam is the preferred kind of insulation for most applications. The densely packed material has an incredibly high R-value, which means that it doesn’t allow any air to pass through it. On top of that, closed-cell foam is also moisture-resistant, so it can serve as an effective vapor barrier. Moreover, since it cures to be hard and dense yet flexible enough to prevent cracking, it’ll also add some structural support to the surface you use it on.

To get an idea of what the structure of this kind of material might look like once the foam cures, think of Styrofoam. After all, that material is also a closed-cell foam, though it’s based on polystyrene, not polyurethane.

Unlike closed-cell foam, open-cell foam is vapor permeable, and therefore better suited to dry environments. Of course, you can always top it off with a vapor barrier once the foam sets.

In any case, open-cell foam can expand to cover an area that’s up to a hundred times bigger than the one that was originally covered. But here, the insulation maintains a more porous structure, which makes it an excellent sound absorber. If you find that hard to believe, keep in mind that acoustic foam panels and bass traps are also made of open-cell PU foam.

The Basic Properties of Acoustic Spray Foam Insulation

Now that we know what spray foam insulation is and what kinds exist, let’s talk about some basic qualities these kinds of products possess.

R-Value and Density

Obviously, we can’t discuss any kind of insulation without giving an overview of its density and R-value. As we have established, spray insulation can have a pretty high density — particularly if you’re looking at closed-cell foam. While open-cell foam has a density of about half a pound per cubic foot, the closed-cell version can have as much as 2 pounds per cubic foot.

Naturally, the density of the product is the biggest indicator of its R-value. Simply put, the higher the density, the higher the R-value. With that in mind, it’s only natural that open-cell insulation can have an R-value of R3.5 per inch. Believe it or not, that puts it in a similar category as fiberglass and cellulose insulation, which have an R-value in the area between R3.2 and R3.8 per inch.

Yet the denser version of foam insulation typically has an R-value of R6.5 per inch. That makes PU foam one of the most effective kinds of insulation on the market. And, of course, the R-value of these kinds of products doesn’t just depend on the density of the foam.

Rather, you can also increase the R-value by applying multiple layers of foam on top of each other. But that might cost you!

Cost

Obviously, the total cost of your spray foam insulation will depend on the type of foam you want to use and the quantity you’ll need. If you’re looking to plug the gap between your window and the surrounding wall, a $5 can of the stuff should do the trick. However, if you’re making a budget for a larger project, you’ll have to do some math.

According to some sources, achieving an R13 value coverage with open-cell foam can cost you between $1.50 and $2.25 per square foot. Getting the same effect with denser spray foam would cost between $3.50 and $5.25 per square foot. To calculate the exact price tag you’ll be dealing with, you’ll have to figure out the total square footage of the surfaces you’re covering and the thickness you need to achieve.

If you’re looking to insulate a single room, you should be able to find spray insulation kits that correspond to the square footage you need. Those kits typically go for anywhere between $250 to $600.

Alternatively, you can get professionals on the job — though the total price tag would then involve the cost of labor too. Still, professional crews have special vehicles that store the components that make expanding foam. So they can’t waste or run out of product.

Overall, the cost of foam insulation can either be on par with other insulation materials or it can exceed it. If you want to use the dense stuff, it’ll probably be about 20% more expensive than regular batt insulation. But by all accounts, you’ll probably receive a quick return on the investment once you consider the energy cost.

How to Apply Spray Foam Insulation

When installing blanket or batt insulation, particularly if it’s made of fiberglass or even mineral wool, you have to look out for airborne irritants. Luckily, that’s not something you have to worry about with spray foam. The application process should be a straightforward point-and-shoot kind of experience. Just mind that the temperature stays around 70 degrees Fahrenheit to allow the foam to set correctly.

As you can see in the video, the application is simple enough once you get going. After hooking each of the two hoses you’ll get in the kit to the corresponding buckets on one end, and the spray gun on the other, you can just go at it. As long as you keep the speed of your passes consistent, you’ll coat the surface evenly.

When the foam sets, check if it’s all flush with the surface you were covering. If you’re insulating walls, use a utility knife to cut away any peaks that go over the studs. That will probably affect the vapor permeability of the material. But if it comes to that, you can fix it with plastic foil or vapor-barrier paint.

Of course, you don’t need to do any of this alone. You can always hire a team of professionals to do it all for you. The cost of labor will surely be worth not having to think about protective gear and room temperature.

Where Can You Put Your Acoustic Spray Foam Insulation?

So how do you know if spray foam insulation is the best option for your home? Well, that’s a question you’ll have to figure out based on your own circumstances. Suffice it to say, it’ll be a good fit for any of the following applications:

  • Working around wiring and irregularly shaped areas in both new construction and retrofit projects
  • Insulating uneven or unfinished walls, like the ones you might have in your basement
  • Filling enclosed walls and ceilings without completely taking the drywall off
  • Filling hollow core doors without disassembling them
  • Insulating floors (application from above) and ceiling cracks (from below)
  • Improving the energy efficiency of your home by applying foam in the attic loft

Once you have the foam right where you need it, it will never lose its insulating properties. Even if you spray it on the ceiling, the foam will expand and set without an issue. Unlike batt insulation, foam will never show any sagging or cracking. So you’ll be able to enjoy your newly insulated space for a long time.

Photo of author

Author S Krone

A lawyer never retires. So I would just say that I am not as active as I used to be. Now I simply dedicate myself to fishing, my hobby, and my grandchildren. For Business Finance News I write about legal aspects of mortgage policies, mostly regarding the rights of policyholders. I also have articles about personal injuries.

Thank you for visiting businessfinancenews.com

Leave a Comment

Business Finance

About Us

Business Finance News is a brand oriented to business owners and dedicated to analyzing and comparing the cost and conditions of B2B procurement of goods and services through free quotes delivered by business partners.

Contact

Address 5050 Quorum Drive, (75254) Dallas TX

telephone 844-368-6072

DISCLAIMER

A personal loan is a medium term loan with a fixed interest rate that is repaid in equal monthly payments and it's usually limited to 24 months. Loan offers and eligibility depend on your individual credit profile. Our lenders can help you obtain as much as $3,000 depending on the lender, your state and your financial situation.

The owner and operator of businessfinancenews.com is not a lender and is not involved into making credit decisions associated with lending or making loan offers. Instead, the website is designed only for a matching service, which enables the users contact with the lenders and third parties. The website does not charge any fees for its service, nor does it oblige any user to initiate contact with any of the lenders or third parties or accept any loan product or service offered by the lenders. All the data concerning personal loan products and the industry is presented on the website for information purposes only.

Businessfinancenews.com does not endorse any particular lender, nor does it represent or is responsible for the actions or inactions of the lenders. Businessfinancenews.com does not collect, store or has access to the information regarding the fees and charges associated with the contacting lenders and/or any loan products. Online personal loans are not available in all the states. Not all the lenders in the network can provide the loans up to $3,000. Businessfinancenews.com cannot guarantee that the user of the website will be approved by any lender or for any loan product, will be matched with a lender, or if matched, will receive a personal loan offer on the terms requested in the online form. The lenders may need to perform credit check via one or more credit bureaus, including but not limited to major credit bureaus in order to determine credit reliability and the scopes of credit products to offer. The lenders in the network may need to perform additional verifications, including but not limited to social security number, driver license number, national ID or other identification documents. The terms and scopes of loan products vary from lender to lender and can depend on numerous factors, including but not limited to the state of residence and credit standing of the applicant, as well as the terms determined by each lender individually. 

APR REPRESENTATIVE

APR (Annual Percentage Rate) is the loan rate calculated for the annual term. Since businessfinancenews.com is not a lender and has no information regarding the terms and other details of personal loan products offered by lenders individually, businessfinancenews.com cannot provide the exact APR charged for any loan product offered by the lenders. The APRs greatly vary from lender to lender, state to state and depend on numerous factors, including but not limited to the credit standing of an applicant. Additional charges associated with the loan offer, including but not limited to origination fees, late payment, non-payment charges and penalties, as well as non-financial actions, such as late payment reporting and debt collection actions, may be applied by the lenders. These financial and non-financial actions have nothing to do with businessfinancenews.com, and businessfinancenews.com has no information regaining whatsoever actions may be taken by the lenders. All the financial and non-financial charges and actions are to be disclosed in any particular loan agreement in a clear and transparent manner. The APR is calculated as the annual charge and is not a financial charge for a personal loan product. 

Late Payment Implications

It is highly recommended to contact the lender if late payment is expected or considered possible. In this case, late payment fees and charges may be implied. Federal and state regulations are determined for the cases of late payment and may vary from case to case. All the details concerning the procedures and costs associated with late payment are disclosed in loan agreement and should be reviewed prior to signing any related document. 

Non-payment Implications

Financial and non-financial penalties may be implied in cases of non-payment or missed payment. Fees and other financial charges for late payment are to be disclosed in loan agreement. Additional actions related to non-payment, such as renewals, may be implied upon given consent. The terms of renewal are to be disclosed in each loan agreement individually. Additional charges and fees associated with renewal may be applied. 

Debt collection practices and other related procedures may be performed. All the actions related to these practices are adjusted to Fair Debt Collection Practices Act regulations and other applicable federal and state laws in order to protect consumers from unfair lending and negative borrowing experience. The majority of lenders do not refer to outside collection agencies and attempt to collect the debt via in-house means. 

Non-payment and late payment may have negative impact on the borrowers’ credit standing and downgrade their credit scores, as the lenders may report delinquency to credit bureaus, including but not limited to Equifax, Transunion, and Experian. In this case the results of non-payment and late payment may be recorded and remain in credit reports for the determined amount of time.