arctic spa error codes

By

|

On Apr 20, 2015

Download our FREE

Guide Now

Arctic Spas

Arctic Spas has been manufacturing innovative hot tub designs for more than 20 years. The owners take a small town approach to delivering products that are high quality because they all have roots in rural Canadian communities. This manufacturer places a big emphasis on making hot tubs that require a minimal amount of maintenance and are more cost-effective to operate than other major brands.

Arctic Spas products can be found at a wide variety of dealer stores throughout the U.S. and Canada, and it is common for these locations to receive accredited status and an A+ rating from the Better Business Bureau. Consumers who are concerned about remaining eco-friendly while soaking in a hot tub will be pleased to learn that Arctic Spas participates in several green initiatives, including partnering with PEFC to help ensure that each of the forest areas that produces wood for their products is managed responsibly.

Spa Models:

  • Arctic Spas
  • Coyote Spas
  • Beauport Swim Spa
  • Hudson Swim Spa
  • Kingfisher Swim Spa
  • Juneau Swim Spa
  • Wolverine Swim Spa
  • Ocean Swim Spa
  • Athabascan Swim Spa
  • Okanagan Swim Spa

Arctic Spa Hot Tub Covers:

The Cover Guy makes all models of Arctic Spa Hot tubs replacement Hot Tub Covers. The Cover Guy has all the dimensions of the Arctic Spa models on file so you do not need to measure! Leave the dimension fields empty,  let us know what model you have and we will take care of the rest. You can Order your new Arctic Spa Replacement Hot tub cover here.

Arctic Spa Error Codes

These are the error codes and display messages that an Arctic Spa may display, along with what they mean and the action required:

Message Meaning Action Required
HL When “HL” error message displays, it means the system shut the heater down because temps at the heater reached 119ºF (48ºC).When “HL” error message is flashing, it means the system  shut down because the water temps in the spa reached 112ºF (44ºC). In this condition, only Smart Winter Mode will remain active.  DO NOT GO IN THE WATER. Remove spa heat cover to allow the water temp to cool down. You can then reset the breaker which will reset the system.DO NOT GO IN THE WATER. Remove spa heat cover to allow the water temp to cool down to 109ºF (43ºC). Call your service supplier or dealer if problem continues.
FLO Means that the system doesn’t detect any water pressure while pump is running. Check water level  and open the water valves. Clean the spa filter or replace the spa filter if needed. Call your service supplier or dealer if problem continues.
FLC The system has identified a problem with the pressure switch. Call your service supplier or dealer if problem continues.
Prr The system has identified a problem with the temperature probe. Call your service supplier or dealer if problem continues.
– – – – Signifies damage to the Processor. This is usually caused by an abnormal power fluctuation. DO NOT GO IN THE WATER. Call your service supplier or dealer
DECL Breaker Setting for the Low Level Programming isn’t set to corresponding power or the breaker is used to operate the spa.
FREE Free Protect error message is scrolling. Means that water temps in spa unit fell below 45º degrees. The pumps will then heat the spa unit until water temp achieves 45º degrees F. To clear the error, you may need to reset the breaker.

Arctic Spa Hot Tub Owners Manuals

Arctic_Spa_Owners_Manual_North_America

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *